#CONNECT CHINESE CNC TOUCH PLATE TO CNC DRIVERS#

So I have added links to them in the list above.ДЄt the front and the back I want to attach the connectors. The rest of the components used are a not absolutely necessary but its good if we could use them. So a 10amp or a 15amp power supply would be enough for a CNC machine of this size. If we do the math for three stepper motors we need about 9amps. Please check if your driver allows a wider range.

#CONNECT CHINESE CNC TOUCH PLATE TO CNC DRIVERS#

The version of TB6600 stepper motor drivers demanded that I used just 12v so I went with that. Power Supply:ДЄ power supply that can deliver a voltage between 12v and 24v is ideal.

With Arduino Uno it is very easy to switch pins and get started with testing. But you can use a Arduino Nano too if you have one. I prefer to use Arduino Uno because it comes with a lot of safety features. In my case I went for the 16 micro stepping and set the driver to deliver around 3.0 вЂ“ 3.2 amps of current. Because these come in different shapes and sizes.

It may vary with the model of TB6600 stepper motor driver that you have. The first three switches manage the micro stepping and the last three switch manage the different current delivered. This stepper motor driver has 6 switches on the sides and a tabular column printed on it. So the TB6600 stepper motor driver is perfect for this purpose. Since the power requirement of the stepper motor is around 3.0amps we need a stepper motor driver that can give at least 5amps. We will be using these values in the stepper motor driver. And the angle of rotation is 1.8 degree which is very common. In my case the power requirement is 3.0amps. So its the amperes that you have to concentrate. Mostly they all work with 12v power and required different amperes. But the same rules apply to all the different sizes of the stepper motors. The stepper motors that I have used are Nema 23 stepper motors.

Connect chinese cnc touch plate to cnc